Harness Accessories

The B24 is the most economical bolt-in bracket offered. It is a heavy-duty Steel bracket that cannot be bent to aid installation.

These are grade 8 bolts available in 7/16in and M8 in different lengths.

Schroth's street legal harnesses have loops sewn into the end of each adjusting strap. These are plastic dowels that can be put through those loops to give something firm to grab on to when adjusting the belts. This really gives you an advantage when the...

1" eyebolt with washer and lock nut for mounting through floor.

Door strap to be fixed on the door panel. Lenght: 220 mm. Hole diameter: 9.5 mm.

Standard 3 Bar Slide for 2" webbing. Uses the simple 3 Bar Slide wrapping technique. Most commonly used for HANS specific shoulder belts or anti-sub straps.

These Eye bolts are designed to work perfectly with the B15 Snap On Brackets.

Reinforcing a harness mounting point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the...

The B15 Snap-In bracket snaps to Eyebolts. It can be sewn into 2" and 3" webbing, or wrapped with an LV4, LV10 or LV11. When wrapped into 3" webbing, one must fold the edges of the webbing in and use an LV7. Can be used on any point of a harness - lap...