Cooling Accessories

Ultra light weight and wind tunnel tested, our 4 inch NACA duct provides over 55% more airflow than standard 3 inch NACA ducts. Used in conjunction with 4 inch tube ducting and a 4 inch plenum results in maximum cooling efficiency for your cooling system...

Drain the water from your Coolshirt and hose with this drain kit.

This non-toxic bio-degradable solution contains a fungicide yet is safe to use in all COOLSHIRT cooling systems. Regular use of this additive will not only help clean the system but it will also improve the performance and life of the system pump...

COOLSHIRT insulated water hose connects your cooler to your shirt to keep you cool. Available in 8 and 12 foot lengths. Hoses are able to be cut down if needed for a shorter hose. Emergency pull release standard on all racing products.

Secures hard-shell units like the Club or Pro System to your vehicle.

Ultra light weight and wind tunnel tested. Our NACA ducts bring air into a vehicle with minimal increase in drag. The purpose of a NACA duct is to increase the flow rate of air through it while not disturbing the boundary layer. When the cross-sectional...

With a 3 inch duct opening, the 90º Slimline Carbon Air Ducting Plenum forces cooler air from outside of the vehicle into the system intake for maximum cooling efficiency. The 90º angle fits easily into limited space for installs in tight cockpits and...

Our new 4 Inch plenum is the most efficient way boost your Quantum Cooler performance. Allowing 55% more airflow than 3 Inch ducting, the 90º Slimline 100% Carbon Fiber Air Ducting Plenum forces cooler air from outside of the vehicle into the system...

Shock-resistant external AC power supply enables cooling outside of your vehicle. This power adapter plugs into the wall and supports 110-220 volts.

Chillout System's Cooling Shirt's Air Duct Plenum for Forces fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. The plenum fits perfectly, covering the intake side of your...

The breakaway connectors are a unique latch assembly that consists of two independent mechanisms that secure together and breakaway at 9lbs of pressure. Our break-away adaptors are independent of the current shirt connectors so that they can be placed in...

Weighing in under 6 oz's, our 100% carbon fiber base plate upgrade reduces system weight by over 1.5 lbs. This is a huge weight savings for those who are trying to minimize weight and increase power to weight ratio.

Non-toxic and biodegradable concentrate (1 parts coolant to 2 parts distilled water)  that circulates through cooler and cooling garments, keeping you cool and your machine running in prime condition.   ChillOut garments encase tubular...

Designed to withstand wear, the military-grade dual prong liquid connector maximizes the reliability of your driver cooling unit. The dual prong design latches securely, enabling the Chillout Hose to be linked to your system and preventing from...

The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. 6 to 10 feet of hose that connects your cooling garment to the driver cooling unit with ¼” fittings for a consistent flow cycle. If the hose...